Canon EOS 1300D User Manual

Page 98

Advertising
background image

f

: Changing the Autofocus OperationN

98

This AF operation is suited for moving subjects when the focusing
distance keeps changing. While you hold down the shutter button
halfway, the camera will keep focusing on the subject
continuously.

The exposure is set at the moment the picture is taken.

When the AF point selection (p.99) is automatic, the camera first
uses the center AF point to focus. During autofocusing, if the subject
moves away from the center AF point, focus tracking continues as
long as the subject is covered by another AF point.

AI Focus AF switches the AF operation from One-Shot AF to AI
Servo AF automatically if a still subject starts moving.

After the subject is focused in One-Shot AF, if the subject starts
moving, the camera will detect the movement, change the AF
operation automatically to AI Servo AF, and start tracking the moving
subject.

AI Servo AF for Moving Subjects

AI Focus AF for Switching the AF Operation Automatically

If focus cannot be achieved, the focus indicator <o> in the viewfinder
will blink. If this occurs, the picture cannot be taken even if the shutter
button is pressed completely. Recompose the shot and try to focus
again, or see “Subjects Difficult to Focus on” (p.101).

If [z1: Beep] is set to [Disable], the beeper will not sound when focus
is achieved.

With AI Servo AF, the beeper will not sound even when focus is achieved.
Also, the focus indicator <o> in the viewfinder will not light up.

When focus is achieved in the AI Focus AF operation with the Servo mode
active, the beeper will sound softly. However, the focus indicator <o> in the
viewfinder will not light up. Note that focus will not be locked in this case.

Advertising