Canon EOS 1300D - Manual (Page 293)

293
Troubleshooting Guide
 If [k1: Movie exposure] is set to [Auto], the ISO speed will be set
automatically. If [Manual] is set, you can set the ISO speed manually
(p.162).
 If you change the shutter speed or aperture during movie shooting, the
changes in the exposure may be recorded.
 Zooming the lens during movie shooting can cause changes in the
exposure regardless of whether the lens’s maximum aperture changes
or not. The changes in the exposure may be recorded as a result.
 If you move the camera to the left or right quickly (high-speed panning)
or shoot a moving subject, the image may look distorted.
 Flickering, horizontal stripes (noise), or irregular exposures can be
caused by fluorescent lighting, LED lighting, or other light sources
during movie shooting. Also, changes in the exposure (brightness) or
color tone may be recorded. With manual exposure, a slow shutter
speed may solve the problem.
 If the camera is connected to a computer, printer, GPS receiver, TV
set, or other device with a cable, Wi-Fi cannot be set ([53: Wi-Fi/NFC]
will be grayed out). Disconnect the cable before changing any settings.
 Refer to the Wireless Function Instruction Manual.
The ISO speed cannot be set for movie shooting.
The exposure changes during movie shooting.
The subject looks distorted during movie shooting.
The image flickers or horizontal stripes appear during movie shooting.
Wireless Functions
Wi-Fi cannot be set.