FujiFilm GFX 50S - Manual (Page 124)

106
6
T
he Shooting M
enus
O
Interval timer photography can not be used at a shutter speed of B
(bulb) or with multiple exposure photography. In burst mode, only
one picture will be taken each time the shutter is released.
N
Use of a tripod is recommended.
Check the battery level before starting. We recommend using an op-
tional AC-15V AC power adapter.
The display turns off between shots and lights a few seconds before
the next shot is taken. The display can be activated at any time by
pressing the shutter button.
To continue shooting until the memory card is full, set the number of
shots to ∞.
AE BKT SETTING
Adjust exposure bracketing settings.
Option Option Description Description
FRAMES/
STEP SETTING
Choose the number of shots in the bracketing sequence
(FRAMES) and the amount exposure is varied with each shot
(STEP).
1 FRAME/
CONTINUOUS
Choose whether the shots in the bracketing sequence are taken
one at a time (1 FRAME) or in a single burst (CONTINUOUS).
SEQUENCE SETTING Choose the order in which the shots are taken.
FILM SIMULATION BKT
Choose the three fi lm simulation types used for fi lm simulation
bracketing (
P
88).
Options Options
c PROVIA/STANDARD d Velvia/VIVID e ASTIA/SOFT
i CLASSIC CHROME g PRO Neg. Hi h PRO Neg. Std
a ACROS * b MONOCHROME * f SEPIA
* Available with yellow (Ye), red (R), and green (G) fi lters.