FujiFilm GFX 50S - Manual (Page 51)

33
2
F
irst St
eps
Inserting Memory Cards
Removing Memory Cards
Before removing memory cards, turn the camera off and open the memory
card slot cover.
Press and release the card to eject it part way (to
prevent the card falling from the slot, press the
center of the card and release it slowly, without
removing your fi nger from the card). The card
can then be removed by hand.
Using Two Cards
The camera can be used with two cards, one in each of its two
slots. At default settings, photos are saved to the card in the sec-
ond slot only when the card in the fi rst slot is full. This can be
changed using
D SAVE DATA SETTING > CARD SLOT SETTING
(STILL IMAGE).
Option Option Description Description Display Display
SEQUENTIAL
(default)
The card in the second slot is used only when the
card in the fi rst slot is full. If the second slot is se-
lected for
D SAVE DATA SETTING > SWITCH
SLOT (SEQUENTIAL), recording will start on the
card in the second slot and switch to the fi rst slot
when the card in the second slot is full.
BACKUP Each picture is recorded twice, once to each card.
RAW/JPEG
As for SEQUENTIAL, except that the RAW
copy of pictures taken with FINE + RAW or
NORMAL + RAW selected for
H IMAGE QUAL-
ITY SETTING > IMAGE QUALITY will be saved
to the card in the fi rst slot and the JPEG copy to the
card in the second slot.
The card used to store movies can be selected using D SAVE
DATA SETTING > MOVIE FILE DESTINATION.