FujiFilm X100F User Manual
Page 162
146
Optional Accessories
F
Lighting: If the unit supports this feature, choose from the
options below.
•
J
(FLASH POWER PRIORITY): Gain range by slightly reduc-
ing coverage.
•
K
(STANDARD): Match coverage to picture angle.
•
L
(EVEN COVERAGE PRIORITY): Slightly increase coverage
for more even lighting.
G
LED light: Choose how the built-in LED light functions
during still photography (compatible units only).
It can
function as a catchlight (
M
/CATCHLIGHT), as an AF-assist
illuminator (
N
/AF ASSIST), or as both a catchlight and an
AF-ASSIST illuminator (
O
/AF ASSIST+CATCHLIGHT). Choose
OFF to disable the LED during photography.
G
Number of fl ashes: Choose the number of times the fl ash
fi res each time the shutter is released in MULTI mode.
*
H
Frequency: Choose the frequency at which the fl ash fi res in
MULTI mode.
*
* Full value may not be applied if limits of fl ash control system are
exceeded.
■ MASTER (OPTICAL)
The options at right will be
displayed if the unit is cur-
rently functioning as mas-
ter fl ash for FUJIFILM opti-
cal wireless remote fl ash
control.
MODE
MASTER(OPTICAL)
ADJUST
END
The master and remote
units can be placed in up
to three groups (A, B, and
C) and fl ash mode and
fl ash level adjusted sepa-
rately for each group. Four
channels are available for communication be-
tween the units; separate channels can be used
for diff erent fl ash systems or to prevent interfer-
ence when multiple systems are operating in
close proximity.
B
B
B
A
C