FujiFilm X100F - Manual (Page 65)

49
M
o
re
o
n
Ph
o
to
g
ra
p
h
y a
n
d Pl
a
y
b
a
ck
More on Photography and Playback More on Photography and Playback
Mode Selection Mode Selection
Program AE (P) Program AE (P)
To allow the camera to adjust both shutter speed and aperture for optimal exposure, set shutter speed
and aperture to A. P will appear in the display.
Aperture: Select A (auto) Shutter speed: Select A (auto)
   
Q If the subject is outside the metering range of the camera, the shutter speed and aperture displays will show
“– – –”.
Program Shift Program Shift
If desired, you can rotate the rear command dial to select other combinations of
shutter speed and aperture without altering exposure (program shift). Program
shift is not available if the attached fl ash supports TTL auto, or if an auto option is
selected for
H IMAGE QUALITY SETTING > DYNAMIC RANGE (P 91). To cancel
program shift, turn the camera off .
   
Shutter speed
Aperture