FujiFilm X100F - Manual (Page 38)

22
Inserting the Battery and a Memory Card
Q Q Batteries Batteries
• Remove dirt from the battery terminals with a clean,
dry cloth. Failure to observe this precaution could
prevent the battery from charging.
• Do not affi x stickers or other objects to the battery.
Failure to observe this precaution could make it im-
possible to remove the battery from the camera.
• Do not short the battery terminals. The battery could
overheat.
• Read the cautions in “The Battery and Power Supply”
( P v).
• Use only battery chargers designated for use with the
battery. Failure to observe this precaution could re-
sult in product malfunction.
• Do not remove the labels from the battery or attempt
to split or peel the outer casing.
• The battery gradually loses its charge when not in
use. Charge the battery one or two days before use.
Removing the Battery Removing the Battery
Before removing the battery, turn the camera off and
open the battery-chamber cover.
To remove the battery, press the
battery latch to the side, and
slide the battery out of the cam-
era as shown.
Q The battery may become hot when used in high-
temperature environments. Observe caution when
removing the battery.
Removing Memory Cards Removing Memory Cards
Before removing memory cards, turn the camera off
and open the battery-chamber cover.
Press and release the card to
eject it part way (to prevent the
card falling from the slot, press
the center of the card and re-
lease it slowly, without remov-
ing your fi nger from the card).
The card can then be removed
by hand.