FujiFilm X100F - Manual (Page 73)

57
M
o
re
o
n
Ph
o
to
g
ra
p
h
y a
n
d Pl
a
y
b
a
ck
Drive Mode
Bracketing Bracketing
Automatically vary settings over a series of pictures.
Option Option Description Description
O O AE BKT AE BKT
Select a bracketing amount. Each time the shutter button is pressed, the camera will take three
shots: one using the metered value for exposure (
P 62), the second overexposed by the selected
amount, and the third underexposed by the same amount (regardless of the amount selected, ex-
posure will not exceed the limits of the exposure metering system).
W W ISO BKT ISO BKT
Select a bracketing amount. Each time the shutter is released, the camera will take a picture at the
current sensitivity (
P 63) and process it to create two additional copies, one with sensitivity raised
and the other with sensitivity lowered by the selected amount (regardless of the amount selected,
sensitivity will not exceed ISO 12800 or fall below ISO 200).
X X FILM SIMULATION BKT FILM SIMULATION BKT
Each time the shutter is released, the camera takes one shot and processes it to create copies at the
settings chosen using
A SHOOTING SETTING > FILM SIMULATION BKT (P 65, 98).
V V WHITE BALANCE BKT WHITE BALANCE BKT
Select a bracketing amount. Each time the shutter button is pressed, the camera takes three shots:
one at the current white balanced setting (
P 66), one with fi ne-tuning increased by the selected
amount, and another with fi ne-tuning decreased by the selected amount.
Y Y DYNAMIC RANGE BKT DYNAMIC RANGE BKT
Each time the shutter button is pressed, the camera takes three shots with diff erent dynamic ranges
(
P 91): 100% for the fi rst, 200% for the second, and 400% for the third. While dynamic range bracket-
ing is in eff ect, sensitivity will be restricted to a minimum of ISO 800 (or to a minimum of ISO 200
to 800 when an auto option is selected for sensitivity); the sensitivity previously in eff ect is restored
when bracketing ends.