FujiFilm X100F User Manual
Page 85
69
M
o
re
o
n
Ph
o
to
g
ra
p
h
y a
n
d Pl
a
y
b
a
ck
Focus Mode
R The camera can show focus distance in meters or feet. Use D SCREEN SETTING > FOCUS SCALE UNITS (P 120)
to choose the units used.
R If ON is selected for G AF/MF SETTING > PRE-AF (P 94), focus will be adjusted continuously in modes S and C
even when the shutter button is not pressed.
■ The Focus Indicator
The focus indicator turns green when the subject is in focus and blinks white when
the camera is unable to focus. Brackets (“( )”) indicate that the camera is focusing
and are displayed continuously in mode C.
j is displayed in manual focus mode.
1000
3.3
+1.0
800
Focus indicator
Checking Focus
Checking Focus
To zoom in on the current focus area (
P 72) for precise focus, press
the center of the rear command dial. Press the center of the rear
command dial again to cancel zoom. In manual focus mode, zoom
can be adjusted by rotating the rear command dial when STAN-
DARD or FOCUS PEAK HIGHLIGHT is selected for
G AF/MF SET-
TING > MF ASSIST (
P 96), while if ON is selected for G AF/MF SET-
TING > FOCUS CHECK (
P 96), the camera will automatically zoom in on the selected focus area when the focus
ring is rotated. Focus zoom is not available in focus mode C or when
G AF/MF SETTING > PRE-AF (P 94) is on
or an option other than
r SINGLE POINT is selected for AF MODE (P 71).
R Use D BUTTON/DIAL SETTING > FUNCTION (Fn) SETTING to change the function performed by the center
of the command dial or assign its default function to other controls.
M
M