Pattern and kit saving and recalling, Pattern saving, Pattern loading – Erica Synths PERKONS HD-01 Drum Machine Synthesizer User Manual

Page 24

Advertising

PATTERN AND KIT SAVING AND RECALLING

VCF

DRIVE

3/2

4/3

MOD LVL

MULTIPLY

GROOVE

PLAY MODE

DIVIDE

MODULATION DESTINATION

MODULATION DEPTH

10% 20% 30% 40% 50% 60% 70% 80%

A B C RND FWD BWD PP RND

PROB

RATCHET ODDS1 ODDS2

SYNC

KIT

PATTERN

MOD

To save a pattern, press the PATTERN button – you have

now entered the pattern menu. Here, each step button

represents a pattern. The brightest illuminated step

button is the currently selected pattern, while the less

illuminated steps represent slots with patterns saved in

them. To save a pattern, push and hold the REC button

and press one of the step buttons representing a

pattern slot, you wish to save. The LED will flash on the

REC button, indicating a successful save. You can save

up to 64 patterns in the step sequencer slots. You can

save the same pattern to multiple slots by holding down

the REC button and pressing on multiple step buttons –

the REC button will flash upon each successful save.

PATTERN SAVING

Both patterns and kits can be saved and recalled. A kit entails the voice parameter settings for all four voices, while a pattern entails the sequencer settings (last step, division/multiplication, ratchets, probabilities,

steps, play direction, shuffle amount, groove settings) for all four voices.

If you want to quickly save changes made to the currently playing pattern, press and hold the PATTERN button and press the REC button promptly.

To LOAD the patterns, initiate the PATTERN menu, press

the step button for pattern you wish to recall – the

pattern will be loaded after the last step of the previous

pattern has finished playing and the sequencer will

advance to the pattern design mode.

To instantly switch to the desired pattern, press and hold

the SHIFT button while in the PATTERN menu and press

the desired pattern button!

PATTERN LOADING

VCF