General information, Maintenance and care, Removing the objective lens cover – Swarovski Optik 10x42 EL Binoculars User Manual

Page 12

Advertising
background image

EL / DE

23

EL / DE

22

EL / EN

EL / EN

3. Push the protective gap cover

provided onto the metal ring. The

gap cover is not firmly attached until

a click can be heard.

Note:

If you want to reattach the objective lens cover again, push

the protective gap cover off the metal ring with your thumb

and then repeat step 3 with the objective lens cover.

5. GENERAL INFORMATION

5.1 SERIAL NUMBER

You will find the serial number of

your EL binoculars underneath the

focusing wheel. In order to be able

to read it, the focusing wheel must be

pulled out.

5.2 FURTHER INFORMATION

You will find comprehensive information

and tips at: SWAROVSKIOPTIK.COM.

6. MAINTENANCE AND CARE

6.1 LENS-CLEANING CLOTH

You can clean high sensitive lens surfaces with the

enclosed special microfibre cloth. It is suitable for objective

lens, ocular lens and spectacles.

click

1. Look through the left ocular with your left eye and turn the

focusing wheel to focus sharply on a selected object.

2. Pull the focusing wheel outwards.

3. Now look at the same object through the right ocular with

your right eye and again adjust the focusing wheel to attain

optimal clarity.

4. Press the focusing wheel back in again.

5. Secure the diopter lock (see section 3.3).

3.5 ADJUSTING THE FOCUS

To get your object into focus, simply

turn the focusing wheel from the shor-

test focusing distance (see technical

data sheet) to infinity.

4. REMOVING THE

OBJECTIVE LENS COVER

1. Open the objective lens cover.

2. Pull the objective lens cover firmly

downwards.

Advertising
This manual is related to the following products: