Blackmagic Design URSA Mini Pro 12K (PL) - Manual (Page 138)

Lens Data
These settings display information about the current lens fitted to your camera. Many electronic
lenses automatically supply information such as the lens model, aperture and focal length.
If you are using a lens that does not provide this information, or you want to enter additional
data, you can tap the pencil icon in this setting to enter the information manually. This will bring
up the ‘lens data’ menu, which contains the following information:
The ‘lens data’ menu showing information automatically
populated from a lens with Cooke /i Technology
Lens Type
Shows the lens model. If your lens type is not automatically shown here, you can tap
this setting to enter the data manually. Your camera has an internal database stored
for many commonly used lenses, so if you need to enter data manually, your camera will
suggest names automatically as you type. This makes entering data much faster.
Use the touch keyboard to enter lens data if it is not provided automatically
Iris
Shows the iris aperture setting at the start of your clip. This information can be
displayed in f- or T-stops depending on the lens used, if supplied automatically. Tap this
setting to enter data manually.
Focal length
Shows the focal length setting of the lens at the start of the recorded clip. When
automatically supplied, this is shown in millimeters. Tap this setting to enter
data manually.
138 Entering Metadata