Epson Y465ss127mo - Manual (Page 217)

Vertical tabbing
VT
Format:
ASCII code: VT
Decimal:
11
Hexadecimal: 0B
Tab Vertically
Comments:
Advances the paper to the next tab setting in the channel selected by
ESC /. If no channel has been selected, channel 0 is used. If no vertical
tabs have been set, the paper advances one line.
ESC B Set Vertical Tabs
Format:
ASCII code: ESC B nl n2 . . . 0
Decimal :
27 66
nl n2 . . . 0
Hexadecimal:
1B 42
nl n2 . . . 00
Comments:
Sets up to
16
vertical tabs in the current line spacing. Tab settings are
not affected by subsequent changes in line spacing. The tab settings are
entered as nl, n2, etc., all from
l-255,
in ascending order. The 0 code
indicates the end of the command. All settings are stored in channel 0
(see ESC b). ESC B 0 clears the tab settings.
ESC b Set Vertical Tabs in Channels
Format:
ASCII code: ESC b c nl n2 . . . 0
Decimal:
27 98
c nl n2 . . . 0
Hexadecimal:
1B 62 c nl n2 . . . 00
Comments:
Functions the same as ESC B, except that the variable c selects a
channel for the vertical tabs, which must be between 0-7. Therefore,
up to eight sets of vertical tabs can be set. The channels are selected by
ESC /. To clear the tabs in channel c use ESC b c 0.
Command Summary
8-17