Epson Y465ss127mo - Manual (Page 51)

2. Press the FORM FEED button to feed the paper forward. Then tear it
off at the perforation.
Note:
If the perforation of the paper is not fed past the
edge
of the
paper guide the first time, press the FORM FEED button again. Do not
use the platen knob to feed the paper.
Reversing the paper to the standby position
After you have tom off the last page of printed paper, if you wish to
reverse-feed the paper remaining in the printer to the standby position,
follow the steps below.
When continuous paper is in the standby position, the holes at the top of
the first sheet stay fitted over the pins of the sprocket unit. When the
paper is in this position, you can switch to single sheet paper (see the
instructions in this chapter), reload the continuous paper, or remove the
continuous paper.
2-14
Paper Handling