Epson Y465ss127mo - Manual (Page 233)

ESC :
Copy ROM into RAM
Format:
ASCII code: ESC : 0
n 0
Decimal: 27 58 0
n 0
Hexadecimal: 3A 00 n 00
Comments:
This code copies the characters in the ROM into RAM so that
specific characters can be redefined. Orator and Orator-S are only
available with the Multi-Font Module. The variable n represents
the font family as follows.
0: Roman 5: OCR-B
1: Sans Serif 6: OCR-A
2: Courier
3: Prestige
4: Script
ESC %
Format:
ASCII code: ESC % n
Decimal: 27 37 n
Hexadecimal: 1B 25 n
Select User-Defined Set
Comments:
ESC & is required to first define the character set. The following
values can be used for n:
0: Selects the normal set.
1: Selects the user-defined set.
ESC 6 Enable Printable Characters
Format:
ASCII code: ESC 6
Decimal: 27 54
H e x a d e c i m a l : 1 B 3 6
Comments:
When the Epson Extended Graphics character table is selected,
this code enables the printing of codes 128 through 159 (decimal)
as characters, not control codes.
Command Summary 8-33