Epson Y465ss127mo - Manual (Page 97)

First, make sure that the TEAR OFF light is on, and then press the MICRO
FEED button. The display shows Next, adjust the
tear-off position in of an inch increments by pressing the FORM
FEED button to feed the paper forward or the LINE FEED button
to feed it backward. After setting the position, press the MICRO FEED
button again.
Caution: The short tear-off feature can only be used with the built-in
tractor feeding system.
Once you use the micro-adjustment feature to set the tear-off position,
the printer remembers that position even after it is turned off.
Selecting Typestyles
Your printer can produce a wide range of typestyles by using different
fonts, pitches, widths, and other print variations. You can select
typestyles in three different ways: by using software commands, by using
or by using other features available on the control panel. This
section describes how to select a typestyle using the FONT, PITCH, and
CONDENSED buttons on the control panel.
Using the Printer 3-33