Se i a – Epson Y465ss127mo User Manual
Page 85
3. Press the button to indicate that you wish to change the setting.
The display changes to:
P a r a l l e l :
4. Press the or button to switch the display to
Se i a
1.
The display changes
to:
Press the button.
The display changes to:
Note: If you are changing only one option, skip to step 14 at this
point. The other steps show you how to change two other options,
following the same method given for the INTERFACE option.
6.
Press the button to switch the display to
The display changes to:
Press the button.
The display changes to:
9600BPS:
8.
Press the
or button to set the baud rate. In this example, the
baud rate is reset to 2400 BPS.
The display changes to:
2400BPS:
Press the button.
The display changes to:
10. Press the button to switch the display to
The display shows:
Using the Printer
3-21