Epson Y465ss127mo - Manual (Page 218)

ESC /
Select Vertical Tab Channel
Format:
ASCII code: ESC / c
Decimal:
27 47
c
Hexadecimal: 1B 2F c
Comments:
This command is used to select the vertical tab channel, with the value
of c from
0-7.
All subsequent VT commands use the channel selected
by this command.
Horizontal Motion
Margins
ESC l
Format:
ASCII code: ESC 1 n
Decimal:
27 108
n
Hexadecimal: 1B 6C n
Set Left Margin
Comments:
Sets the left margin to n columns in the current character size. Settings
made in the proportional mode are treated as 10 cpi. Use lowercase 1
(as in left), not the numeral one. The minimum space between the
margins is the width of one double-wide 10 cpi character.
ESC Q Set Right Margin
Format:
ASCII code: ESC Q n
Decimal:
27 81
n
Hexadecimal: 1B 51 n
Comments:
Sets the right margin to n columns in the current character spacing.
Settings made in the proportional mode are treated as 10 cpi. The
minimum space between the margins is the width of one double-wide
10 cpi character.
8-18
Command Summary