Change macro – Epson Y465ss127mo User Manual
Page 79
If you have loaded a macro, the display briefly shows:
Next, the display changes to:
You are now back at the SelecType main menu.
5. To switch to one of the other main menu modes, press the
or
button. If you wish to exit SelecType mode, press the SelecType
button.
CHANGE MACRO
The CHANGE
mode lets you change the settings of whichever
macro is currently loaded. It also gives you the option of saving the
settings as any of the four
The settings available in
mode are listed below.
FONT
Roman,
Serif,
Prestige,
Script,
Draft.,
(optional),
(optional)
PITCH
CONDENSED
FORM LENGTH*
SKIP
CPI, 12 CPI, 15
Proportional*
* Some fonts cannot be printed in
15
CPI or
proportional spacing. In this case, the pitch is not
displayed.
Off
Tractor 24 lines to 132 lines
CSF
i
n 1 24 lines to 132 lines
CSF
i
n 2 24 lines to 132 lines
* The line spacing is in
of an inch units.
Off
LEFT
0 to 80 columns
Using the Printer
3-15