JVC GY-HC900STU 2/3" HD Connected Cam Studio Camcorder (Body Only) - Manual (Page 149)

Battery 0
For configuring the warning voltage or warning
level (%) according to the battery specifications
and condition of use.
9 Type 2
For configuring the battery warning using voltage
or remaining level (%).
[Setting Values: Capacity%, R Voltage]
Memo :
0 For batteries where information on the
remaining level cannot be acquired, the status
will be the same as when “Voltage” is selected
even when “Capacity%” is selected. To find out
whether information on the remaining level can
be obtained for the battery, check the remaining
battery level icon on the display screen.
9 Near End (V) 0
Outputs a warning sound when the voltage falls
below the preset level.
[Setting value: 12.1 V to 14.0 V (
R
13.1 V)]
Memo :
0 This cannot be configured to a value that is lower
than the setting of [End (V)].
9 End (V) 0
Outputs a warning sound upon reaching the preset
voltage, and turns off the power automatically when
the voltage falls below the preset level.
[Setting value: 12.0 V to 13.9 V (
R
12.8 V)]
Memo :
0 This cannot be configured to a value that is
higher than the setting of [Near End (V)].
9 Near End (%) 2
Outputs a warning sound when the voltage falls
below the preset level (%).
[Setting Values: 10 %, 15 %, R 20 %, 25 %, 30 %]
Memo :
0 This cannot be configured to a value that is lower
than the setting of [End (%)].
0 A warning sound is also output when the voltage
reaches 12.5 V or lower.
9 End (%) 2
Outputs a warning sound upon reaching the preset
level (%), and turns off the power automatically
when the remaining level falls below the preset
level.
[Setting Values: 1 %, 5 %, R 10 %, 15 %, 20 %]
Memo :
0 This cannot be configured to a value that is
higher than the setting of [Near End (%)].
0 A warning sound is also output when the voltage
reaches 12.0 V, and the power will turn off
automatically when the voltage reaches 11.9 V
or lower.
Language
Switches between languages in the menu screen.
[Setting Values: R English, Français, Español] (U
model)
[Setting Values: R English, Français, Deutsch,
Italiano, Español, Türkçe] (E model)
Reset All
Resets all menu settings.
Memo :
0 [Date/Time] and [Time Zone] cannot be reset.
(
A
P149 [ Date/Time ] )
(
A
P150 [ Time Zone ] )
0 This item is not selectable when recording in
Camera mode, during Clip Review, during live
streaming and in Media mode.
Date/Time
For setting the year, month, day, hour, and minute.
Memo :
0 The display order of the date (year, month, day)
follows the setting in [Display Settings]
B
[Date
Style]. However, the 24-hour format is used for
the hour display regardless of the [Time Style]
setting.
(
A
P150 [ Time Style ] )
0 If the signal reception for GPS satellites allows
date and time to be set based on the GPS
information, you can set the time obtained from
the GPS satellite by pressing the [USER1]
button.
The [USER1] button is grayed out if information
for setting the date and time cannot be acquired
from the GPS satellite. u v
System Menu
149
Menu
Display and
D
etailed
S
etti
ngs