Setting zebra pattern – JVC GY-HC900STU 2/3" HD Connected Cam Studio Camcorder (Body Only) User Manual
Page 80
Setting Zebra Pattern
When the luminance level range for displaying
zebra patterns is specified, diagonal lines (zebra
pattern) are displayed at areas with the specified
luminance levels during shooting.
1
Set the zebra display pattern.
Select the display pattern in [LCD/VF]
B
[Shooting Assist]
B
[Zebra].
.
Zebra 2 Display
Example
Zebra 1 Display
Example
2
Specify the brightness (luminance) level
range for displaying zebra pattern.
Set the maximum brightness limit in [LCD/VF]
B
[Shooting Assist]
B
[Zebra]
B
[Top 1]/[Top
2], and the minimum brightness limit in [Bottom
1]/[Bottom 2].
Item
Settings
Options
Top 1
Maximum
brightness limit for
displaying Zebra 1
5%, 10% to 95%,
98%, 100%, Over
Bottom 1 Minimum
brightness limit for
displaying Zebra 1
0%, 5% to 95%,
98%, 100%
Top 2
Maximum
brightness limit for
displaying Zebra 2
5%, 10% to 95%,
98%, 100%, Over
Bottom 2 Minimum
brightness limit for
displaying Zebra 2
0%, 5% to 95%,
98%, 100%
Memo :
0
When [Zebra] is set to “1 Pattern”, “Top 2” and
“Bottom 2” cannot be selected.
0
If the area specified by two zebra patterns
overlaps, Zebra1 pattern will be displayed.
0
The timing to detect the zebra pattern display
can be configured only when “J-Log1” or “HLG”
is selected in [Color Space] and “Cam” or “Cam
+ Return” is selected in [Convert to ITU709].
3
Display the zebra pattern.
0
When the viewfinder is connected, the zebra
pattern is displayed when the [ZEBRA]
switch is set to “ON” or push down to
“MOMENT”.
0
When the viewfinder is not connected, the
zebra pattern is displayed using the user
button assigned with “Zebra”.
.
During zebra pattern display,
(zebra icon)
is displayed on the display screen in Camera
mode.
Memo :
0
When the viewfinder is connected, priority is
given to the [ZEBRA] switch on the viewfinder
so the user button assigned with “Zebra” will not
function.
80
Setting Zebra Pattern
Sh
ooting