ATEN 2-Port USB 3.0 4K DisplayPort Dual-Display KVMP Switch - Manual (Page 16)

CS1942DP / CS1944DP User Manual
8
CS1942DP Rear View
CS1944DP Rear View
No. Component Description
1 DCC Port
(Daisy Chain
Control) This RJ-45 port is used to connect two units together
when setting up DCC mode for a quad-display mode.
See
Quad-Display (DCC Mode) , page 14 for
instructions.
2 Console Port
Section The cables from your keyboard, mouse, monitors,
microphone, and speakers plug in here. Each
connector is marked with an appropriate icon to
indicate itself.
3 KVM Port Section The cables that link the switch to your computers
plug in here. Each KVM port section is comprised of
a microphone jack, speaker jack, USB Type B socket
and two DisplayPort connectors
4 Power Jack The power adapter cable plugs into this jack.
5 USB 3.1 Gen 1 Hub
USB peripherals (printers, scanners, drives etc.) plug
into this port.
This USB 3.1 Gen 1 port features 5 Gbps
data transfer rates for compatible USB peripherals .
1 2 3
4 6 5
1 2 3
4 6 5