ATEN 2-Port USB 3.0 4K DisplayPort Dual-Display KVMP Switch - Manual (Page 34)

CS1942DP / CS1944DP User Manual
26
Keyboard Operating Platform
The CS1942DP / CS1944DP’s default port configuration is for a PC
compatible keyboard operating platform. If your console uses a PC compatible
keyboard and you have a Mac or Sun attached to a port, for example, you can
change the port’s keyboard operating platform configuration so that the PC
compatible keyboard emulates the Mac or Sun keyboard. The procedure is as
follows:
1. Bring the KVM focus to the port you want to set.
2. Invoke HSM (see page 24).
3. Press and release the appropriate Function key (see table below). After
completing this procedure, you automatically exit HSM.
List Switch Settings
To see a listing of the current switch settings, do the following:
1. Open a text editor or word processor and place the cursor in the page
window.
2. Invoke HSM (see page 24).
3. Press and release [F4] to display the settings.
USB Reset
If the USB loses focus and needs to be reset, do the following:
1. Invoke HSM (see page 24).
2. Press and release [F5]
Function Key Operation
[F1] Sets the SPC mode so that it can work under special
operating systems as a standard (104 key) keyboard.
[F2] Enables Mac keyboard emulation, see page 31, for details.
[F3] Enables Sun keyboard emulation, see page 32, for details.
[F10] Enables Windows keyboard emulation.