ATEN 2-Port USB 3.0 4K DisplayPort Dual-Display KVMP Switch - Manual (Page 36)

CS1942DP / CS1944DP User Manual
28
Keyboard Emulation Control
To toggle between keyboard emulation enabled and disabled, do the following:
1. Invoke HSM (see page 24).
2. Press [N] .
Mouse Emulation Control
To toggle between mouse emulation enabled and disabled, do the following:
1. Invoke HSM (see page 24).
2. Press [M] .
Mouse Port Switching
Mouse Port Switching allows you to use the mouse wheel button (clicked
twice) to switch ports. For Mouse Port Switching to work Mouse Emulation
must be enabled. To enable or disable mouse port switching, do the following:
1. Invoke HSM (see page 24).
2. Press [W] .
Monitor Re-detection
If the monitor's display is blank, use this hotkey to re-detect the monitor’s
EDID. Monitor re-detection can be enabled or disabled. The default setting is
disabled. To enable monitor re-detection, do the following:
1. Invoke HSM (see page 24 ).
2. Press [Q] [ n ] [Enter] .
n is a one-digit number that represents the port number: n =1-2
(CS1942DP); or n =1-4 (CS1944DP).
This procedure is a toggle. Repeat to revert to the original setting.