Remote rx, Switch to auto rx, Rx start speed – Canon imageCLASS MF753Cdw Multifunction Wireless Color Laser Printer User Manual
Page 563
* Specifying [Off] will prevent the use of sleep mode.
[Use Incoming Ring]
[Off]
[
On
]
[Number of Rings]
1 to
2
to 99 (time(s))
[Remote RX]
[Menu] [Function Settings] [Receive/Forward] [Fax Settings]
Specify whether a telephone connected to the machine can be used to receive faxes (Remote RX). Receiving Faxes
via Telephone (Remote RX)(P. 300)
If you specify [On] in this setting, you can also specify the number used for the external telephone (Remote RX ID).
[Use Remote RX]
[Off]
[
On
]
[Remote RX ID]
00 to
25
to 99
[Switch to Auto RX]
[Menu] [Function Settings] [Receive/Forward] [Fax Settings]
Specify whether the machine switches to automatic receive mode (Auto RX) after a set period of time if you do not pick
up the receiver for an incoming fax when the fax receive mode is set to [Manual].
If you specify [On] in this setting, you can also specify how long (in seconds) the incoming ring tone sounds before the
machine switches to Auto RX.
[Use Switch to Auto RX]
[
Off
]
[On]
[Ring Time Until Auto RX]
1 to
15
to 99 (sec.)
[RX Start Speed]
[Menu] [Function Settings] [Receive/Forward] [Fax Settings]
It may take some time for reception to begin due to factors such as a poor phone line connection. If this occurs, adjust
the initial communication speed to a lower level.
[
33600 bps
]
[14400 bps]
[9600 bps]
[7200 bps]
[4800 bps]
[2400 bps]
Settings Menu Items
553