Epiphan Pearl Mini Live Video Production System - Manual (Page 107)

Pearl Mini User Guide Change the HTTP/HTTPS port values
Label Description/Options
allowed by Ethernet at the network layer. It’s best for all nodes in your network to
use the same value. Only change this value if you know that other nodes use a
different value.
4. Reboot Pearl Mini when prompted. From the Configuration menu, select Maintenance and click
Reboot Now on the maintenance page.
5. After the system has finished rebooting, log back in to the Admin panel as admin and verify that all
changes were applied.
Change the HTTP/HTTPS port values
On Pearl Mini, the default HTTP port is 80 and the default HTTPS port is 443. If the default ports used by Pearl
Mini are not available on your network, you can change them using the Admin panel. Consult your system
administrator for the correct port values to use for HTTP and HTTPS traffic.
Ensure that the port value you choose is unique and is not currently assigned on Pearl Mini, see
Network ports used by Pearl Mini .
To change the HTTP/HTTPS port values using the Admin panel:
1. Login to the Admin panel as admin , see Connect to the Admin panel .
2. From the Configuration menu, select Security . The Security configuration page opens.
3. Under HTTPS configuration, change the default HTTP and HTTPS port numbers. Click Apply when
you're done.
96