Canon RC-V100 Remote Controller - Manual (Page 12)

12
6 START/STOP button
Starts and stops video recording.
While recording, the button lights up in red.
7 BARS (display color bars) button
Turns on/off the display of color bars on the screen.
While the color bars are displayed, the button lights up in orange.
8 CUSTOM PICT. (custom picture) button
Opens and closes the custom picture menu.
Only with a REMOTE B terminal connection: While the custom picture menu is
displayed, the button lights up in orange.
9 u (review recording) button
Reviews the recording.
While the recording is being reviewed, the button lights up in orange.
ND filter controls, Shutter controls and ISO speed/Gain controls
10 ND (change ND filter) button
Each press of the button changes the ND filter.
Only with a REMOTE B terminal connection: The button lights up in orange.
11 ND filter indicators
The indicator of the currently selected ND filter’s number will light up in orange*. The
indicator will change even if you changed the ND filter setting on the camera itself.
Depending on the camera used and the current position of the ND filter, the indicators
may flash to indicate other conditions.
* Some cameras are compatible with an extended ND range. When connected to such cameras,
indicators 1 and 4 will both light up to indicate the ND 5 setting and indicators 2 and 4 will both light
up to indicate the ND 6 setting.
12 SHUTTER SELECT (select the shutter mode) button
Each press of the button changes the shutter mode. Available shutter modes will differ
depending on the camera used.
Only with a REMOTE B terminal connection: The button lights up in orange.
13 SHUTTER Н / О buttons
When a relevant shutter mode is selected, these buttons change the shutter value.
Available values will differ depending on the camera used and other settings on the
camera.
Only with a REMOTE B terminal connection: The buttons light up in orange.
10
11 12 13 14 15