Canon RC-V100 Remote Controller - Manual (Page 7)

7
En
Using the REMOTE B Terminal
Connect the remote controller to a compatible camera using the optional RR-10 or
RR-100 8-pin Remote Cable (10 m/100 m (32.8 ft./328 ft.), respectively). With the
REMOTE B connection, compatible cameras can receive and process multiple
simultaneous commands from the remote controller.
1 Turn off the camera.
2 Remote controller: Slide the terminal selection switch to the REMOTE B
position.
3 Remote controller: Connect one end of the 8-pin remote cable to the REMOTE
B terminal.
• Be sure to align the orientation notch on the cable’s plug with the protrusion on the
terminal.
4 Camera: Connect the other end of the 8-pin remote cable to the camera’s
REMOTE (or REMOTE B) terminal.
• Again, paying attention to the orientation notch.
NOTES
• The remote controller’s REMOTE A and REMOTE B terminals cannot be used
simultaneously. Make sure that a cable is connected only to the terminal selected with
the terminal selection switch.
To the camera’s REMOTE
(or REMOTE B) terminal
(round 8-pin jack)