ATEN StreamLIVE PRO All-in-One Multichannel AV Mixer - Manual (Page 50)

StreamLIVE™ PRO User Manual
38
Transition Control when the Quick Mode is Disabled
To set a DVE switching effect for the PGM preview, do the following:
1. Select a DVE switching effect, the icon lights up .
2. Tap the Auto button.
Transition Control when the Quick Mode is Enabled
To set a DVE switching effect for the PGM preview, do the following:
1. Select a DVE switching effect, the icon lights up.
2. Tap on a scene of your choice from the Scene Selector to enable the
selected DVE switching effect after the specified time (0.3-3.0 seconds).
Refer to page 52 on how to modify this specified time.
If you do not want any DVE switching effect for the PGM preview, do the
following:
1. Select , the icon lights up.
2. Tap on a scene of your choice from the Scene Selector to instantly
broadcast the selected scene as the PGM preview.
To disable Quick Mode, Tap again to exit Quick Mode
( ).
Component Description
Tapping the Auto button will begin the transition after a specified
time (0.3-3.0 seconds). Go to the Setting Deck and refer to
page 52 on how to modify this specified time.
Tapping the Cut button and the transition happens immediately.