ATEN StreamLIVE PRO All-in-One Multichannel AV Mixer - Manual (Page 83)

71
Chapter 8
Firmware Upgrade
Download Requirements
 A computer connected to the Internet.
 An empty external storage device or a USB flash drive with at least 1.1GB
of free space.
Preparing the Firmware
1. On the external storage device, create a folder named “uc9040_img”.
2. Download the complete software and unzip it.
3. Save your file (in the format “uc9040_Vx.x.xxx.bin”) to the
“uc9040_img” folder.
4. Plug the external storage device to the rear USB 3.1 Gen1 Type-A port of
the unit. See USB 3.1 Gen1 Type-A port , page 8.
5. Refer to Upgrading the Unit on page 73 to start firmware upgrade.
Note:  A folder named “uc9040_img” must be created in the root menu
of the USB storage device.
 The firmware upgrade file (*.bin) must be placed in the
“uc9040_img” folder.
 The firmware upgrade file should look like the following:
uc9040_V x . y . yyy
where x and y combine to indicate its version and
JO Q V U!2 JO Q V U!3 P V U Q V U MP P Q!P V U
I E N J2 1 9 1 Q W JE F P I E N J5 L W JE F P T S D 0 Q H N
B V E JP!2 B V E JP!3
JO Q V U!4 JO Q V U!5
Q P X F S E D 2 3 W V T C T U P S B H F N JD 0 MJO F JO
For Firmware Upgrade