ATEN StreamLIVE PRO All-in-One Multichannel AV Mixer - Manual (Page 87)

Chapter 8. Firmware Upgrade
75
Upgrade Fail
If firmware upgrade fails during the firmware upgrade (e.g. disconnected USB
storage device or power, etc.), the last LED of Volume Meter LEDs will blink
every 0.3 seconds.
The unit will reboot after some time and try to upgrade the firmware again.
If it fails again, it will reboot and try again.
When this happens, it is likely that the upgrade file is corrupted. We
recommend:
1. Unplug the power and the USB storage device from your UC9040.
2. Retrieve the firmware file again and recheck the USB preparation process
( Download Requirements ).
3. Replug your USB storage device.
4. Replug the power. The unit will start the upgrade process after booting up.
If you are still unable to upgrade the unit’s firmware, please contact your
dealer.
0.3s 0.3s