ATEN StreamLIVE PRO All-in-One Multichannel AV Mixer - Manual (Page 86)

StreamLIVE™ PRO User Manual
74
4. If the firmware upgrade was successful, the first LED of the Volume Meter
LEDs will blink every 0.3 seconds. The unit will reboot after some time to
complete the process.
Note: If the firmware upgrade fails, the last LED of Volume Meter LEDs
will blink every 0.3 seconds. Refer to
Upgrade Fail on page 75 for
more information.
Upgrade Assessment Fail
When the upgrade assessments fail (e.g. when no USB storage device is
connected or USB drive does not have a firmware upgrade file, etc.), the
GO
LIVE button and the last LED of Volume Meter LEDs will blink every 0.3
seconds.
Press the GO LIVE button to return the unit to normal operation and try again
from step 1.
0.3s 0.3s
0.3s 0.3s
& &