NewTek TriCaster TC1 (2 RU) - Manual (Page 174)

P a g e | 158
Output source options include the displays and audio assigned to any of the four primary outputs, but also
any other Switcher source with the exception of M/Es and animated
Buffers (a Buffer holding an animated
source will output a still image, which may nevertheless ‘still’ be useful for some purposes).
SECTION 15.1 NDI OUTPUT APPLICATIONS
This means you can simply assign one of these outputs to a suitable downstream system or device, and ‘hot -
punch’ them at will. Downstream NDI -enabled devices connected to one of these outputs can thus be
effectively re- configured directly from VMC1’s Live Desktop or Control Surface , which provides special
support for this feature.
The potential uses of these outputs is nearly unlimited:
• Supply external NDI monitoring solutions (such as the NDI Studio Monitor application included in
the free NDI Tools Pack).
• Recorded them anywhere your network runs using NDI IsoCorder.
• Converted them to SDI for connection to traditional (non- IP) studio systems, using either NewTek’s
optional NC1 IO systems, or NewTek NDI Connect (and Connect Pro) software and suitable hardware.
Note: Each NC1 IO unit supports up to 4 SDI output channels and a full suite of production tools including per-
channel overlays (which can be still images, animated clips, or even other NDI sources), allowing you to re-
combine and re-brand your video endlessly.