NewTek TriCaster TC1 (2 RU) User Manual
Page 187
P a g e | 171
FIGURE 206
•
Checkmark channels 2, 3 and 4 in the column below
In 1
(see
). This routes sound from the first
incoming Skype caller to all
Aux 1
output channels
except
channel 1.
•
Open the audio configuration pane
Input 14
and, in the
Routing
tab, clear the
Aux 1
matrix.
FIGURE 207
•
This time, checkmark channels 1, 3 and 4 in the column below
In 1
. This routes sound from the second
incoming Skype caller to all
Aux 1
output channels
except
channel 2.
•
Repeat the steps above for audio inputs 15 and 16, omitting the
Aux 1
checkmarks under
In 1
for channels
3 and 4, respectively.
That’s it –
you’ve go
t the perfect mix minus configuration for return to your four Skype callers. All you need
to do now is finish up by configuring the TalkShow returns on the VS4000 system.