NETGEAR Nighthawk AX8 8 Stream Wi-Fi 6 DOCSIS 3.1 Cable Modem and Multi-Gigabit Router - Manual (Page 134)

Factory Settings
You can return the modem router to its factory settings. Use the end of a paper clip or
a similar object to press and hold the Reset button on the back of the modem router
for at least seven seconds. The modem router resets, and returns to the factory
configuration settings shown in the following table.
Table 5. Factory default settings
Default behavior Feature
www.routerlogin.com,
www.routerlogin.net,
or 192.168.1.1 User login URL Modem router login
admin User name (case-sensitive)
password Login password (case-sensitive)
192.168.1.1 LAN IP Local network (LAN)
255.255.255.0 Subnet mask
Enabled DHCP server
192.168.1.2 to
192.168.1.254 DHCP range
Disabled DMZ
ISP/MSO ToD (time
of day) configuration Time zone
ISP/MSO ToD (time
of day) server
configuration Time zone adjusted for daylight
savings time
Enabled SNMP
Disabled (except
traffic on port 80, the
HTTP port) Inbound (communications coming
in from the Internet) Cable modem firewall
Enabled (all) Outbound (communications going
out to the Internet)
User Manual 134 Supplemental Information
Nighthawk AX8 AX6000 WiFI Cable Modem Router Model CAX80