Drive – Hasselblad H1D User Manual

Page 118

Advertising
background image

118

119

Hasselblad H1D

Hasselblad H1D

DRIVE

There are three drive modes: Single, Continuous and Multi exposure. They are all accessed by
pressing the
DRIVE button on the grip.

Single
In this mode, an exposure is made when the shutter release button is pressed, the film is advanced

to the next frame and the camera is made ready for the next exposure. To make the next exposure

however, you must first release the shutter release button and then press again.
In camera active mode:
1) Press the DRIVE button on the grip.
2) Turn the front control wheel to: Single
3) Press Save to store the setting.

Continuous
In continuous mode, the camera automatically continues to make exposures and advance

the film for the next exposure as long as you maintain pressure on the shutter release button

(to the end of the film) at a rate of approximately 2 frames per second.
In camera active mode:
1) Press the DRIVE button on the grip.
2) Turn the front control wheel to: Continuous
3) Press Save to store the setting.

Advertising