Hasselblad H1D - Manual (Page 89)

88 89 Hasselblad H1D
I J K
Hasselblad H1D
If you attempt to make an exposure with the darkslide is closed, however, you will receive a
warning message in the viewfinder and grip LCDs – ‘e darkslide is closed’.
Darkslide key H
Withdraws and replaces the darkslide. Fold out the key and turn it counter-clockwise 360°
(towards the open symbol) to withdraw it and clockwise 360° (towards the closed
symbol) to replace it.
!
The darkslide can only be withdrawn when the magazine is attached to the camera.
Film tab holder I
Holds an ID tab from the film roll pack as a reminder of the type of film loaded. Don’t forget
to change it if you change film type!
Film holder key J
Secures the film holder in the magazine. Fold out the key and turn counter-clockwise 90° to
remove the film holder and turn clockwise 90˚ to lock the film holder in place.
Magazine settings lock
K
All settings can be locked to avoid inadvertent changes. To change the settings, slide the
settings lock (see diag) to the right until it stops. Aer the changes have been made, slide the
settings lock to the le (see symbol on magazine) again to secure the new settings.
Databus interface
Data interface between magazine and camera. Ensure the contacts are kept clean and pro-