Hasselblad H1D - Manual (Page 149)

148 149 Hasselblad H1D Hasselblad H1D
1) You can firstly clear an unwanted line of text by highlighting the X symbol in the box and
repeatedly pressing the Sel.(AF) button.
2) Find the character you want by turning the rear control wheel until it appears on the
screen. (The ‘space’ character is the ‘empty space’ to the left of the exclamation mark,
top row furthest to the left).
3) Move the cursor with a combination of the front and rear control wheels until the desired
character is highlighted.
4) Press the Sel.(AF) button to save the character that will then appear along the lower part
of the screen.
5) Continue with the same procedure until you have completed the line of characters and
symbols.
6) Press the Save (DRIVE) button to store the new setting.
You can erase or change a character at any time in this mode but remember to save any
changes made.
4.3 Date & Time
Date & Time
1) From 4 Settings, press the Enter (DRIVE) button.
2) Turn the front control wheel until 4.3 Date & Time appears.
3) Press the DRIVE (Enter) button.
You will now see the following on the display.