Hasselblad H1D - Manual (Page 71)

70 71 Hasselblad H1D Hasselblad H1D
Carrying strap
e carrying strap is attached by firstly withdrawing the safety
collar. e hook is then freed and attached to the strap lug. Slide
back the safety collar to ensure the hook remains in the locked
position.
Batteries
e H1D requires batteries for all actions. ere is no mechanical
reserve facility so it is advisable to always have a spare set of batteries
or exchange set if using a rechargeable battery pack. As is the case
with most batteries, problems might be encountered when used in
very low temperatures. In this situation it is advisable to keep an
exchange set in an inside pocket, for example, to maintain them
near body temperature.
e battery holder is located inside the removable part of the
grip. While keeping the battery holder button depressed, swing
the battery holder retaining lever downward until it stops. e
battery holder will now be released from the grip. Press the red
battery cassette retaining button inwards on the holder to release
the battery cassette. Load three CR-123 lithium (or equivalent)
into the cassette, ensuring the polarity of each battery is correctly
oriented (see the ‘+’ markings on the batteries and the cassette).
Re-insert the cassette into the battery holder, ensuring that it is
seated properly in place and that the red button returns fully into