Attaching/removing the battery – Hasselblad H1D User Manual
Page 57
56
57
Hasselblad H1D
Hasselblad H1D
C.
External Power Supply Socket: plug the cable from an external power
supply into this socket. See ‘Technical Specifications’ for power
supply requirements.
D.
Link connector: is connector accepts the camera link cable,
which connects to the ‘link’ connector on the camera.
E.
Status indicator: indicates that power is supplied to the unit. e
color indicates the current status of the Image Bank: Red = Error,
Yellow
= Busy, and Green = Ready. If the indicator flashes, the
battery needs recharging.
F.
On/Off button: switches the Image Bank and sensor unit on/off.
Attaching/removing the battery
Attaching the battery
To attach the battery on the Image Back follow procedure below:
1. Lower the battery into the battery compartment.
!
Do not place it on top of the terminal pins!
2. Push the battery as far as it goes towards and onto the termi-
nal pins.
A
B C D E F