Hasselblad H1D - Manual (Page 125)

124 125 Hasselblad H1D Hasselblad H1D
be set to provide virtually vibration-free shutter release. It can be used instead of a remote
release cable/cord/device when split-second timing is not critical. The camera’s exposure set-
tings (Manual or Auto) will be according to the light metering requirements just prior to the
mirror being raised so choose your method accordingly with long delays in very changeable
lighting conditions.
Self timer setting
e Self timer function is set via the control wheels in the following manner:
1) Press the MENU button on the grip
2) Turn the front control wheel until Self Timer appears
3) Press ENTER (DRIVE button on the grip)
4) Turn the front control wheel to access the options, that are:
Delay
Mirror sequence
Mirror Up / Mirror Goes Down
(A drop shadow will be displayed beneath the selected symbol, for example )
5) When Delay is highlighted - - turn the rear control wheel to choose a delay range from
2 - 60s in 1s intervals.
6) Turn the front control wheel again to choose sequence.
Delay highlighted. 10 seconds
chosen as option.