Hasselblad H1D - Manual (Page 64)

64 65 Hasselblad H1D Hasselblad H1D
In the studio
1. Connect the H1D to the Image Bank with the link cable.
2. Connect the Image Bank to the computer with the FireWire cable.
!
If you are connecting the Image Bank to a computer (ex. a
laptop computer) which is incapable of supplying sufficient
power to the Image Bank, it will be necessary to mount
the battery as well or to connect an external power supply
unit- see ‘Technical Specifications’ for details.
3. If needed, attach a studio-flash (strobe lighting) system to the
camera body for synchronizing flash and exposure.
4. Switch on the computer.
5. If you are using a battery, press the Image Bank’s On/Off button
and wait until the unit is ready (status indicator = green).
6. Start the FlexColor application. See the ‘FlexColor Software
Reference’ manual for instructions about how to use the soft-
ware.
MAC
or
PC
FlexColor