HP 8000M - Manual (Page 111)

6-35
Configuring the Switch
Network Monitoring Port Features
C
o
n
fig
u
rin
g
th
e
Sw
itc
h
Figure 6-23. Selecting the Port(s) To Monitor
Figure 6-24. Selecting a VLAN To Monitor
• To monitor a single port, click on that port, then click on Apply Changes.
• To monitor a several ports:
a. Press and hold [Ctrl].
b. Click on the ports that you want to monitor, then release [Ctrl]. The selected
series of ports should now be highlighted.
c. Click on Apply Changes
To monitor a VLAN, click on this menu, select the
desired VLAN, then click on Apply Changes.