HP 8000M User Manual
Page 185
6-109
Configuring the Switch
Automatic Broadcast Control (ABC) Features
C
o
n
fig
u
rin
g
th
e
Sw
itc
h
To Access ABC:
1.
From the Main Menu, Select:
3. Switch Configuration
5. Advanced Features
4. Automatic Broadcast Control (ABC)
Figure 6-69. The Default ABC Screen (No VLANs Configured)
2.
If no VLANs are configured, go to step 3. If VLANs are configured, press
Edit, then select the VLAN in which you want to configure ABC.
N o t e
The rest of this procedure assumes that VLANs are not configured. If you have
VLANs configured on your switch, you can still use this procedure. The screen
layout will be different than shown here, but the parameters are the same.
3.
Press
[E] (for Edit).
4.
Use the Space bar to enable ABC. Select one of these options:
•
IP_IPX: Enables ABC for both the IP and IPX protocols.
•
IP: Enables ABC for the IP protocol only.
•
IPX: Enables ABC for the IPX protocol only.