HP 8000M - Manual (Page 161)

6-85
Configuring the Switch
Load Balancing: Switch Meshing
C
o
n
fig
u
rin
g
th
e
Sw
itc
h
Figure 6-56. Example of the Screen for Configuring Ports for Load Balancing
4. In the Group column, move the cursor to the port you want to assign to
the switch mesh.
5. Use the Space bar (or press [M]) to choose Mesh for the selected port.
If you are configuring switch meshing, all meshed ports in the switch will
belong to the same mesh domain. (See figure 6-54 on page 6-82.)