HP 8000M - Manual (Page 112)

6-36
Configuring the Switch
Network Monitoring Port Features
C
o
n
fig
u
rin
g
th
e
Sw
itc
h
Configuring Port Monitoring from the Switch Console
To Access Port Monitoring:
This procedure describes configuring the switch for monitoring when moni-
toring is disabled. (If monitoring has already been enabled, the screens will
appear differently than shown in this procedure.)
1. From the Console Main Menu, Select:
3. Switch Configuration...
3. Network Monitoring Port
Figure 6-25. The Default Network Monitoring Configuration Screen
2. In the Actions menu, press [E] (for Edit).
3. If monitoring is currently disabled (the default) then enable it by pressing
the Space bar (or
[Y]) to select Yes.
4. Press
[v] to display a screen similar to the following and move the cursor
to the Monitoring Port parameter.
Enable monitoring
by setting this
parameter to “Yes”.