Husqvarna 305 - Manual (Page 14)

14 - English
2. PRESENTATION
The control panel on the top of Automower ® is where
you manage all the mower settings. Open the control
panel cover by pressing down the
STOP button.
When the main switch is set to position 1 for the first
time, a start-up sequence begins which includes:
When the main switch is set to position
1 for the first
time, a start-up sequence begins which includes:
language selection, time format, date format and the
four-digit PIN code and setting the time and date, see
3.8 First start-up and calibration on page 32.
After this, the selected PIN code must be entered
every time the main switch is set to
1 . See
6.5 Security (3) on page 47 for more information on
theft protection.
Movement pattern
The mower’s movement pattern is irregular and is
determined by Automower
® itself. A movement
pattern is never repeated. This mowing system
means the lawn is mown equally without any mowing
lines.
Locating the charging station
Automower ® runs irregularly until it reaches the guide
wire. The mower then follows the guide wire in to the
charging station.
The guide wire is a cable that is laid from the charging
station towards, for instance, a remote part of the
working area or through a narrow passage to be then
connected with the boundary wire. For more
information, see 3.6 Installation of the guide wire.