Husqvarna 305 - Manual (Page 17)

English - 17
3. INSTALLATION
The charging station must be positioned with a great
deal of free area in front of it (at least 10 ft/3 metres).
It should also be centrally placed in the working area
so that Automower
® finds it easier to reach all areas
in the working area.
Do not put the charging station in confined spaces in
the working area. There must be a straight boundary
wire, at least 5 feet (1.5 metres) long, to the right and
left of the charging station. The wire must be laid
straight out from the rear end of the charging station.
Any other locations can mean that the lawn mower
enters the charging station sideways and will have
difficulty docking.
Do not put the charging station in a corner in the
working area.
The charging station must be positioned on relatively
level ground. The front end of the charging station
must be a maximum of 1.5” (3 cm) higher than the
back end. The front end of the charging station must
never be lower than the back end.
The charging station must not be positioned so that
its plate bends.
3020-043
3