Husqvarna 305 - Manual (Page 57)

English - 57
8. MAINTENANCE
Replacing the battery
If the operating times for the mower are shorter than
normal between charges, this indicates that the battery
is getting old and eventually needs replacing. The
battery is fine as long as the mower maintains a
well-cut lawn.
1. Set the main switch to position 0.
2. Turn the mower upside down.
3. Clean around the battery cover.
4. Unscrew the four screws on the battery cover
(Torx 20) and remove the battery cover.
5. Pull out the battery by pulling on the strap.
6. Set the main switch to position 0.
7. Turn the mower upside down.
8. Fit a new Husqvarna original battery.
NOTE! Press on the contact strip to fit the
battery in place.
9. Fit the battery cover. The sealing strip is
reusable and does not have to be replaced.
10. Screw in place the four screws on the battery
cover (Torx 20).
IMPORTANT INFORMATION
Use Husqvarna's original battery only.
Compatibility with other batteries cannot be
guaranteed.
3020-044
3020-045