Husqvarna 305 - Manual (Page 24)

24 - English
3. INSTALLATION
Passages when mowing
Long and narrow passages and areas narrower than 5
– 7 feet (1.5 - 2 metres) should be avoided. When the
Automower
® mows there is a risk that it will travel
around in the passage or area for a period of time. The
lawn will then look flattened.
Slopes
The boundary wire can be laid across a slope that
slants less than 10 %.
The boundary wire should not be laid across a slope
that is steeper than 10 %. There is a risk of
Automower
® finding it difficult to turn there. The
mower will then stop and show the fault message
Outside working area. The risk is at its greatest in
damp weather conditions, as the wheels can slip on
the wet grass.
However, the boundary wire can be laid across a
slope steeper than 10 % when there is an obstacle
that Automower
® can be permitted to collide with, for
example, a fence or a dense hedge.
Automower ® can mow areas
inside the working area that
slope up to 10" (25 cm) per
distance metre (25 %). Areas
that slope more must be
demarcated by the boundary
wire.
When any part of the working
area's boundary slopes more
than 4" (10 cm) per distance
metre (10 %), the boundary
wire must be routed about 8"
(20 cm) in on flat ground
before the slope starts.